Comfort Birding

Living on a high-rise with a tall tree in front of your window, birding can be a joy sometimes. That's how I am able to enjoy birding while inside the room. All I have to do is leave a small gap on the curtains, to allow me a view of the branches, then hide and wait. Sometimes, I don't even need to wait. I just need to keep listening to bird calls while doing some other stuffs. If I hear something, I take a peek and see if a bird is there. :)

Olive-backed sunbird (male)

Olive-backed sunbird (immature)

Olive-backed sunbird (female)

Scarlet-backed flowerpecker (male) -
on a parasitic mistletoe growing on a branch of the same tree

Scarlet-backed flowerpecker (female) 

Black-naped oriole

Spotted dove

Yellow-vented bulbul

Javan myna

Oriental white-eye

These bird pictures were all taken from the same tree.

MacRitchie Nature Trail 2013-06-02

Together with my friend, we meet up at Khatib MRT early in the morning to visit the MacRitchie Nature trail. Across the street opposite the station, we took bus 852 bound for Bukit Batok Interchange. Less than 30 minutes later, we get off at St. Theresa stop and proceed to the park.

We walked a few kilometers stopping here and there to listen and look for some birds. Unfortunately, the bird count was relatively poor. When we reached the Treetop walk, we decided to just continue along the trail instead of going back to where we came from at Marymount road. We're already at 4.6Km from the entrance. If we go back, we need to walk another 4.6Km, so we just decided to take the 10.2Km route to Bukit Timah which is only 5.6Km ahead.

View from the treetop walk

At one point after the Treetop walk, we could hear many sunbirds calling and we stopped in-front of a flowering tree. Here we were able to photograph a Crimson sunbird, which is the best bird of the day.

When we reached the end of the trail, we were expecting to reach the Bukit Timah Nature reserve. But we probably took a wrong turn earlier and didn't see the other trail. In the end, we just decided to call it a day and took bus 157 to get to the MRT station.

The marker at the end of the trail

 
We had lunch at Toa Payoh community center, then took the MRT to Novena. My friend wanted to visit the church there, so I accompanied him. After the short visit, we took the MRT home.

Here are the other pictures I was able to capture.

Squirrel gnawing on the bark 

Giant ant, about an inch long

 

The Art of Stacking Images

Most photography enthusiast who knows a bit about manual control is aware that higher ISO means brighter image at the expense of grainier image and in the case of digital cameras, higher noise. This is true for all types of digital cameras, be it pro-level DSLRs to your average Joe's point and shoot digicams. Noise in small sensor cameras are more prone to noise due to several reasons. Digicams typically uses a small sensor and lens, this translates to less light received by the sensor. In order to achieve the same brightness at a typical sensitivity of ISO 100, for example, the amplifier gain needs to be increased. As with any electronic amplifiers, high gain equals higher noise level.

A very noisy image

There are several ways to reduce noise. One way is to apply digital blurring. This lets the user perceive the effect of reduced noise at the expense of sharpness. This technique, although widely used, doesn't really reduce the noise, but rather blend the noise color, eg. pink pixel, with the surrounding pixels. Most image noise cleaning software uses this technique. A better way of decreasing noise is by stacking images. This technique actually increases the signal-to-noise (S/N) ratio of the image, by combining several images to form one cleaner image. This technique although good, needs to have a stationary target and several images. On moving targets, you're out of luck.

After blurring, noise is reduced at the expense of sharpness

A simple explanation of this technique is this. Noise is assumed to be on random pixels and actual image data is at a consistent point. When 2 images with a similar signals are averaged out, the result will be similar (eg. average of 1 and 1 is 1). Noise on the other hand, due to its' random nature, may not exists on the same pixel location between 2 images(eg. average of 1 and 0 is 0.5). By combining 2 images, the signal-to-noise ratio is increased, meaning noise is reduced by half. By combining many images together, noise becomes negligible.

The illustration below shows the result of stacking 3 images. As more images are combined, the noise signal becomes weaker and weaker until only the real signal remains.

Sample image:

1 image, no stacking

2 images stacked

4 images stacked

 8 images stacked

From the sample image above, the difference of a single image and 8 stacked images is obvious. The amount of graininess is greatly reduced when many images are combined. After stacking, the image will be cleaner and we can post process it a bit to improve the sharpness. Sharpening an image can induce some noise specks, but it will be up to the person how much he wants to sharpen the image.

To stack manually, images are loaded as layers. To stack 2 images, for example, one image's opacity should be set to 50% making it half transparent, the bottom image is set to 100%. Once aligned, merge the 2 images. For more images, repeat the process merging 2 at a time. Several images can be merged together at the same time, but aligning them will be harder and opacity ratios will be calculated, for example when using 3 images, set the 3 layer's opacity to 100%, 66%, 33% respectively.

Screenshot of Gimp using layers to merge images

In wildlife photography, stacking more than 1 image is harder because an animal tends to move and vegetations can move due to wind. There are some cases where they just stay still, like the bird picture above. The same technique is widely employed in astrophotography.

While most celestial objects do move a lot as well, their perceived motion is very slow from our vantage point several million miles away. The effects of heat wave and atmospheric disturbances are also nullified by stacking. Stacking, not only reduces the noise, it can also improve the amount of details in an image. Astrophotographers usually stack dozens of frames for deep sky image and hundreds to thousands of images for planetary and high magnification images. With thousands of frames from a video clip, they don't manually do it by hand, there exists tools like Registax to help automate the task of aligning and stacking images.

An example of Jupiter image is shown below:

Clockwise from top-left: Single frame, stacked image, wavelet filter applied, post-processed